Shopping Cart

No products in the cart.

TheOne Solar Film

Car Tinting

> 0 %
UV Rejection

(Wavelength 300~380nm)

> 0 %
IR Rejection

(Wavelength 780~2500nm)

All you need is Uplus

Our car window tint, with full-wavelength UV blocking (UVA, UVB), and a great way to reduce the heat inside your car, offering privacy and a fantastic visual appearance.

Reduce the power consumption of the air conditioner in the car

The infrared rejection rate is over 90%, which can reduce the power consumption of the air conditioner in the car (increase the efficiency of the air conditioner) and increase the battery life.

Made in Taiwan

TheOne Solar Film contains more than one million nano-ceramic infrared blocking particles which can absorb more than 90% of near-infrared radiant heat, the closely arranged particles can also block UV rays of different wavelengths, achieving >99% UV ray blocking efficiency.

Patented Black Technology

7 Reasons to choose Uplus TheOne Solar Film

More than 90% of heat insulation effect

>99% full UV wavelength blocking
(UVA,UVB,UVC)

Mental-free, no interference to phone signal

Shatter resistant

Makes driving easier by reducing glare

Non-toxic, energy-saving and effectively reducing carbon emissions

Uplus provides a 5-year warranty for its “heat insulation performance”

KOL and Influencer’s recommendation

Improved comfort levels by reducing heat and glare

Series/Specification

TheOne Solar Film

Uplus solar film is value-oriented, with no product differentiation in terms of quality levels. We offer only the highest quality, and our pricing is transparent, avoiding price-based competition.

TSER= 1-SHGC (Solar Heat Gain Coefficient)%

Visible Light Transmittance (VLT)
72% 

Visible Light Reflectance (VLR)
7.8%

Total Solar Energy Rejection (TSER)
51%

Shading Coefficient (SC)
0.56

Visible Light Transmittance (VLT)
50.17% 

Visible Light Reflectance (VLR)
6.01%

Total Solar Energy Rejection (TSER)
55.93%

Shading Coefficient (SC)
0.506

Visible Light Transmittance (VLT)
32.6% 

Visible Light Reflectance (VLR)
5.3%

Total Solar Energy Rejection (TSER)
62%

Shading Coefficient (SC)
0.44

Visible Light Transmittance (VLT)
25.5% 

Visible Light Reflectance (VLR)
4.9%

Total Solar Energy Rejection (TSER)
63%

Shading Coefficient (SC)
0.42

Visible Light Transmittance (VLT)
13.8% 

Visible Light Reflectance (VLR)
5.4%

Total Solar Energy Rejection (TSER)
66%

Shading Coefficient (SC)
0.39

Front windshield suggestion

Door glass and Rear windshield suggestion

Your choice, making the world more beautiful

Singapore
Green Label
Malaysia
SIRIM Certification
Singapore Green
Building Material
Malaysia
MyHIJAU

Things you need to know

  • There are many tiny black dots (frits) that line the top of your window, which may make the film unable to adhere properly during installation. The installer will judge based on experience and current conditions whether the film needs to avoid the frit area. If it is not flat on the glass surface, the film will not adhere completely after being applied, and some bubbles will appear.
  • The top edge may have a maximum edge gap of 1-2 mm. This ensures film edges are not lifted by contact with the frame gasket when a window is raised and lowered inside its frame. In certain installations where top edge “shaving” has been performed, it may appear to be no gap at all.

Every year, we help reduce CO₂ emissions by approximately

0

tons

equivalent to saving 25,550,000 kWh of electricity consumption,

which is equivalent to planting 1 million trees for our planet.